This project is read-only.

WM6 + internal GPS

May 10, 2008 at 6:23 PM
Hi All,

When I'm working with external GPS/Bluetooth receiver  - ALL OK,
but when I'm trying work with internal GPS module, NMEA not receiving and always throw timeout event.

P.S.
But OziExplorerCE normally working.
May 11, 2008 at 1:17 AM
SharpGPS should work with any serial port sending NMEA. Make sure you are using the correct port and speed settings for your internal gps module, and that it uses a serial to communicate on.
May 11, 2008 at 8:49 AM
correct speed it 9600 or 4800 or other ?
May 11, 2008 at 10:55 AM
On ASUS P526 it not worked. If I'm installing new COM port and transfering data from GPS port (com1) to new virtual port(i.e. com6), then it worked. If I'm working with COM1 directly - it not worked. But OziExplorerCE working with COM1 Any idea ?
Dec 11, 2008 at 7:57 AM
Edited Dec 11, 2008 at 7:59 AM
I can confirm the problem of internal gps.
I've a HTC DIamond (with internal gps) and I cannot read gps data.
with a  Mobile 2003 and a bluetooth gps I use it correctly.
Dec 20, 2008 at 7:41 PM
I have same problem with my HTC Touch 3g. I used (default GPS port) COM4 and it don't working. But when I install GPS Gate and use virtual port COM1, then it working on both ports. Have some one solution for this problem?
Jan 15, 2009 at 1:27 PM
Hi All,
I am using a PsionTeklogix Workabout pro with Windows Mobile 6 Pro and I havent any of your problems reported here.
Mar 30, 2010 at 4:08 PM
+1, I also get the serialport timeout with internal GPS. I have checked that I use the correct serialport and datarate. I can manage to get it working with an external bluetooth GPS.